2022 CAT D3 LGP for Sale in Southampton

CAT D3 LGP Weight: 9,693 KGS Hours: 2758 HP: 104
Rippers available at an additional cost.
ENGINE
Blow by- Minimal- - - - Knocking- no knocking- - - - Air cleaners- Good- - - - Any smoke- No smoke- - - - Oil or fuel leaks- None visible- - - - General running condition- Runs well- - - - - -
TRANSMISSION
Gear change- HST works well- - - - Steering- Responsive- - - - Oil leaks- None visible- - - - Is the transmission noisy?- No- - - - Torque converter- no juddering- - - - Controls- Good tight controls- - - - General running condition- Moves well- - - - - -
UNDERCARRIAGE
Shoe width- 658mm- - - - Shoe height- 35mm, 80%- - - - Shoes - any wear in the trailing edge- Minimal- - - - Rail height- 102mm, 70%- - - - Any signs of link failure?- No- - - - Average diameter of pins and bushings- 56mm, 70%- - - - Have pins been turned on chains?- No- - - - Sprockets- 75mm Gape, 16mm tips, 80%- - - - - -
UNDERCARRIAGE - IDLERS
Left side front idler- 50mm, 90%- - - - Right side front idler- 50mm, 90%- - - - - -
UNDERCARRIAGE - TOP ROLLERS
Left side roller- 157mm x 159mm, 80%- - - - Right side roller- 156mm x 159mm, 80%- - - - - -
UNDERCARRIAGE - BOTTOM ROLLERS
Roller 1- Visual only, 30%- - - - Roller 2- Visual only, 30%- - - - Roller 3- 166mm x 167mm, 30%- - - - Roller 4- 167mm x 167mm, 30%- - - - Roller 5- Visual only, 30%- - - - Roller 6- 166mm x 166mm, 30%- - - - Roller 7- 163mm x 165mm, 30%- - - - - -
CAB
Cab mounts - any wear- Good- - - - Any wiring for laser system- Yes- - - - Back up alarm- Loud and clear- - - - Battery isolator switch- Manual fitted- - - - Lights all working- 4- - Wipers- All working- - - - Heater- good heat all round- - - - Seat condition- Good condition- - - - Caldding condition- Good condition- - - - Floor matt condition- No wear or tears- - - - Seat belt- good- - - - Mirrors- Rear view only- - - - Horn- Loud and clear- - - - Cab mounts- Good mounts- - - - Cab glass condition- Minimal scuffs- - - - Cab glass have any cracks?- No cracks- - - - Any perspex fitted- None fitted- - - - - -
BLADE
Blade type- PAT- - Blade width- 3190mm- - Blade height- 1000mm- - Main lift rams, wear in pins- L/H: 2mm x 2mm, R/H: 2mm x 2mm- - Pitch rams, wear in pins- L/H: 2mm x 3mm, R/H: 2mm x 3mm- - Tilt ram, wear- L/H: 2mm, R/H: 1mm- - Ball joint wear- 10mm- - C Frame, wear- L/H: 5mm, R/H: 5mm- - Face / Moldboard- Good clean face, no damage- - - - Cutting edges condition- 30mm- - - - Have cutting edges been turned?- No- - - - General blade condition- Decent blade- - - - - -
PAINT & DECALS
Any damage to panels- No damage to panels- - - - Paint condition- Fair paint, some scratches- - - - Any areas repainted- No- - - - Any rust patches- Few areas, back of blade- - - - - -
DIMENSIONS- Length
Width
Height- Measurements with blade straight- 4300mm
3190mm
2720mm- Measurements with blade turned- 4720mm
2820mm
2720mm- Measurement from outside to outside of tracks-
2410mm- - Measurements with blade straight- Length: 4300mm
Width: 3190mm
Height: 2720mm- Measurements with blade turned- Length: 4720mm
Width: 2820mm
Height: 2720mm- Measurement from outside to outside of tracks- Length:
Width: 2410mm
Height: