JCB Tracked Excavators for Sale (84)

The JCB JS130 LC tracked excavator is the most common model in the used 13-tonne excavator market in the UK.  It helps to be able to be transported by a 26-tonne, 3-axle truck, rather than relying on a low loader to get to site. There are typically more JS13 LC advertised here than any other model of JCB. At the 13-tonne operating weight, this comes as no surprise as they are as welcome on the farms as they are on the contraction sites of the UK. The 81kW engine in the latest models is the JCB EcoMAX 444 TCA. This engine is claimed to be 10% more effiecnt than the Tier 3 unit it replaced in the earlier model. JCB no longer market the JS130 - it has been replaced by the 131X LC. The fully-welded X-frame construction of the undercarriage lends long-term durability with the turret welded to...... More Details...>

The JCB JS131 LC is the hire specification version of the popular JS130 LC 13-tonne tracked excavator range. This means no SCR, so no Adblue needed, no DPF, but less power than the 130 model using the same EcoMax 444 engine. As a consequence, the JS131 runs more quietly than the 130 model. This JS131 LC model sold well in the new market and therefore used examples are plentiful The model has been replaced by the new 131X (note the loss of the 'JS' in the model name). The bucket capacity ranges from 0.35 to 0.89cubic metres and an operating weight from 13,991kg to 14,288kg depending on options taken - 2.1m vs 2.5m dipper length, for example.... More Details...>

The JCB JS145 LC is the long carriage version of the tracked excavator - there is an HD (heavy duty carriage version as well, both of these options have fully welded 'X' frame with sloping side members. Track shoe options in the JS145 LC are 500, 600 or 700mm. The tracked excavator is powered by JCB's EcoMax 444 Stage IV diesel with 81kW from its 4.4 litres and does not require the use of a DPF. Bucket capacity ranges from 0.34 to 0.85 cubic metres and operating weights from 14,511 kgs to 16,084 depending on LC or HD and the choice of boom and blade. This JS145 model has been superceded by the 140X and 150X stage V machines in JCB's latest lineup.... More Details...>

The JS160LC was available from 2007 until around 2103 with the Isuzu 92kW engine but was upgraded with the 2012 launch of the revised version with the JCB DieselMax 444 engine with 93kW, since upgraded to the 448 stage V with 97kW. These conventional tail swing excavators with an approximate operating weight of 17.5 tonnes to 19.5 tonnes are still marketed by JCB. Standard features of the JS160 LC are 7" colour screen, Rear camera, Heated air suspension seat, Climate control, Automatic Engine Shutdown, 2Go Hydraulic Isolation System, Cushioned boom and dipper ends.... More Details...>

When specifying new, buyers of the JCB JS220 LC (Long Carriage) could choose between a monoboom or a TAB (Triple Articulated Boom). The latest model was launched in 2013 and has since been replaced by JCB's latest new generation X Series machine the 220X. Powered by a 129kW EcoMAX T4i/Stage 3B engine, the later post 2013 model saw fuel consumption improvements of some 105 compared to the earlier models.  An added benefit for operators is no SCR, Adblue and DPF are needed. Operating weight is around the 22 tonnes mark with bucket capacity averaging out at 1.25 cubic metres.... More Details...>

JCB are the world's largest manufacturer of backhoe loaders - many are made in the UK, but the company also has a huge backhoe loader factory in India. Inventors of the backhoe loader in the 1950's, JCB have remained the number one choice for site operators in the UK even though they have started to call them 'Excavator Loaders'. The popular 3CX backhoe has been in production for more than 40 years and is still going strong today. Read more about the history and current model lineup below.... More Details...>

JCB are almost as famous for their mini-diggers in the UK as they are for their famous backhoe loaders. This means that there are always lots of used JCB mini-diggers for sale at PlantPages. in fact there are usually more JCB mini-diggers for sale here than from any other manufacturer. JCB made their first 801 mini-excavator as far back as 1989, hitting the 100,000 units mark in 2016. Their current range starts at just 0.8 tonnes and goes to 10 tonnes - you may find some of the larger machines over 8 tonnes in our 'tracked excavators' category. Check out the model naming for conventional tail-swing (CTS) and zero tail-swing (ZTS) models.... More Details...>

A common site on building sites and here on PlantPages, JCB Site Dumpers are always in demand. JCB manufactures Site Dumpers with payloads of 1 tonne, 3 tonnes, 6 tonnes, 7 tonnes and 9 tonnes - so a 1T has a payload of a tonne etc. Higher up the weight range, the site dumpers go from simple roll over protection bars (ROPS) to the option of a full cab (6T onwards). Check out the 'F' in the model name 7FT, for example. Check out the High Tip (HT in the model name) for those job that need that bit more reach. Other specials to look out for are the Hi Viz versions.... More Details...>

JCB Telehandlers have been on sale in the UK since launch back in 1977 with the JCB 520 telescopic handler.  This is the precursor to the Loadall range of telehandlers from JCB. There have been many models of JCB telehandler over the years, with the 525 appearing in 1979 - just two years after the initial launch. JCB make the bold claim that the Loadall range is the world's best selling telehandler.... More Details...>

JCB usually compete with Hitachi for the position of most common tracked excavator for sale at PlantPages. This means you will usually find a great choice of used JCB tracked excavators for sale here. The JCB tracked excavator range starts at 11 tonnes - everything smaller, the company classes as compact, or mini-excavators.  Expect to find some machines from 8-11 tonnes here in the tracked excavator category as we don't include these in the mini- category. The top-weight machines go right up to 37 tonnes and have two ranges - teh JS (JZ for zero tail swing) and the new X Series. Most of the machines you will find advertised at PlantPages are the JS ranges with the JS131 and 220 the most popular. As usual, the 'LR' in the model number stands for Long Reach boom.... More Details...>

If you work at JCB then you might call these a 'JCB Wheelie' but we prefer advertising JCB Wheel excavators for sale at Plant Pages. The range comes in two main model lines - the one we are all familiar with, the 'JS' range and the new Hydradig range which, JCB claim, is the first purpose designed wheel excavator, as opposed to a tracked version being modified. These modern looking machines could well be the future for the 'JCB Rubber Duck'. There are specialist material handler versions of the JCB wheel loaders - these have an 'MH' at the end of the model number, (unless it's a hydradig then it's called a 'Wastemaster'). You will find these in their own materials handler category at Plant Pages.... More Details...>

As a hugely popular machinery manufacturer on the UK, you would expect there to be a wide choice of JCB wheel loaders (wheeled loaders) for sale at PlantPages - and you'd be right. JCB wheeled loaders are usually the most common brand of front end loader on the site. Launched back in 1969, JCB has had more than 50 years of experience of wheel loader manufacturing. Popular with farmers and waste management companies alike - there is a special 'Wastemaster' version and an 'Agri Farm Master' version - JCB loading  shovels, as they are also known, are identifiable by their '400' series model numbering. The current model lineup numbers 21 different examples, from the smallest 2.5 tonne 403 up to the 20 tonne 457 with stage V engines.  Many of the mid-sized loaders benefit from JCB's tie up...... More Details...>