70-75% undercarriage, 3.2m dipper, 700mm tracks, hammer circuit, HQH, 2.2m3 HSM digging bucket, autolube, 360 degree cameras, boxing ring, CE plated, owned from new, very good working condition, choice of units
Case crawler excavators have been around since the early 1990s when Case tied up with Japan's Sumitomo who manufactured a range from 7 to 80 tonnes. The turn of the century saw the CX range launched - the B-Series (note the 'B' at the end of the model numbering) came in 2007 with the CX-C Series arriving in 2013. Just two years later saw Case launch the Tier 4 Final D-Series crawler excavators with Stage V reached across the CX85D, CX90D and CX350D and above models. Check out the reduced radius models for working in urban environments - these are available from 14.5 to 25.8 tonnes. these are... Read more...
When you have a range of tracked excavators as wide as Caterpillar does, it is unsurprising that their, 'small' crawler excavator range starts with an operating weight of 13.8 tonnes with the 313. This range extends to the mighty CAT 395 with an impressive operating weight of 94 tonnes and a maximum digging depth approaching ten metres. These uge machines do not play such a large role in the UK market - the most common CAT crawler excavators in the UK market weigh in at the 20-30 tonnes operating weight, like the CAT 320 or 330. If you need to work in tight areas, then check the model names... Read more...
The Doosan crawler excavator range stars at an operating weight of 14.4 tonnes with the latest, 7th generation model using a 115hp version of Doosan's own diesel engine. Topping the range is the DX1000 with an operating weight of just under 100 tonnes, driven by a Perkins 2806, 629hp diesel engine. This range extends through a wide range including standard and 'LC' versions with longer and wider undercarriages. All of the latest Doosan crawler excavator range meet stage V emissions standards - most of the range use Doosan's own engines, up to 35 tonnes, with the Scania DC09 and the Scania... Read more...
There are always plenty of Hitachi tracked excavators for sale at PlantPages. The Hitachi range of medium and large tracked has been popular in the UK for decades with a huge range on offer - from 13 tonnes operating weight to a huge 360 tonne excavator. Marketing the range under the 'Zaxis' umbrella model range, the model numbers all start with a ZX. As with other manufacturers of tracked excavators, the 'LC' appearing in the model name means that the machine has wider and longer tracks. The -6 or -7 refers to the generation of the machine (as of 2022 with is -7 for crawler excavators). Read more...
JCB usually compete with Hitachi for the position of most common tracked excavator for sale at PlantPages. This means you will usually find a great choice of used JCB tracked excavators for sale here. The JCB tracked excavator range starts at 11 tonnes - everything smaller, the company classes as compact, or mini-excavators. Expect to find some machines from 8-11 tonnes here in the tracked excavator category as we don't include these in the mini- category. The top-weight machines go right up to 37 tonnes and have two ranges - teh JS (JZ for zero tail swing) and the new X Series. Most of the... Read more...
The JCB JS130 LC tracked excavator is the most common model in the used 13-tonne excavator market in the UK. It helps to be able to be transported by a 26-tonne, 3-axle truck, rather than relying on a low loader to get to site. There are typically more JS13 LC advertised here than any other model of JCB. At the 13-tonne operating weight, this comes as no surprise as they are as welcome on the farms as they are on the contraction sites of the UK. The 81kW engine in the latest models is the JCB EcoMAX 444 TCA. This engine is claimed to be 10% more effiecnt than the Tier 3 unit it replaced in... Read more...
The JCB JS131 LC is the hire specification version of the popular JS130 LC 13-tonne tracked excavator range. This means no SCR, so no Adblue needed, no DPF, but less power than the 130 model using the same EcoMax 444 engine. As a consequence, the JS131 runs more quietly than the 130 model. This JS131 LC model sold well in the new market and therefore used examples are plentiful The model has been replaced by the new 131X (note the loss of the 'JS' in the model name). The bucket capacity ranges from 0.35 to 0.89cubic metres and an operating weight from 13,991kg to 14,288kg depending on options... Read more...
The JCB JS145 LC is the long carriage version of the tracked excavator - there is an HD (heavy duty carriage version as well, both of these options have fully welded 'X' frame with sloping side members. Track shoe options in the JS145 LC are 500, 600 or 700mm. The tracked excavator is powered by JCB's EcoMax 444 Stage IV diesel with 81kW from its 4.4 litres and does not require the use of a DPF. Bucket capacity ranges from 0.34 to 0.85 cubic metres and operating weights from 14,511 kgs to 16,084 depending on LC or HD and the choice of boom and blade. This JS145 model has been superceded by... Read more...
The JS160LC was available from 2007 until around 2103 with the Isuzu 92kW engine but was upgraded with the 2012 launch of the revised version with the JCB DieselMax 444 engine with 93kW, since upgraded to the 448 stage V with 97kW. These conventional tail swing excavators with an approximate operating weight of 17.5 tonnes to 19.5 tonnes are still marketed by JCB. Standard features of the JS160 LC are 7" colour screen, Rear camera, Heated air suspension seat, Climate control, Automatic Engine Shutdown, 2Go Hydraulic Isolation System, Cushioned boom and dipper ends. Read more...
When specifying new, buyers of the JCB JS220 LC (Long Carriage) could choose between a monoboom or a TAB (Triple Articulated Boom). The latest model was launched in 2013 and has since been replaced by JCB's latest new generation X Series machine the 220X. Powered by a 129kW EcoMAX T4i/Stage 3B engine, the later post 2013 model saw fuel consumption improvements of some 105 compared to the earlier models. An added benefit for operators is no SCR, Adblue and DPF are needed. Operating weight is around the 22 tonnes mark with bucket capacity averaging out at 1.25 cubic metres. Read more...
Launched in 2005, the JCB JZ140 was the first of the larger excavators to have the zero tail swing treatment by JCB. The JZ140's original standard spec for UK operators includes a 4.7 m monoboom, 2.5 m dipper and 700 mm triple grousers and it can use all the popular JS130 buckets and attachments. Options include a dozer blade and digging depths are 2.1m to 3m. JCB claim that there is no significant trade off in digging performance for the JZ140 vs the conventional 130 but the machine is heavier so some consideration needs to be given regarding the transport of the excavator. 2010 saw a... Read more...
Kobelco manufacture a range of tracked excavators that are popular in the UK. These Japanese machines are famed for their reliability - the midi-sized excavators using Isuzu power with Hino (Toyota subsidiary) engines chosen for the top sized machines operating up to 85 tonnes. In the UK, excavators tend to be of a more sensible sizes, with the largest examples of Kobelco tracked excavators for sale at PlantPages would be the 50 tonne SK500 models. The most common weight range available is usually in the 30 to 35-tonne operating weight range with the SK300 and SK350. If you are looking for... Read more...
Since many of the Komatsu excavators bought in the UK were made in County Durham, the machines have a more home grown feel about them, helping to make them popular for UK buyers in the competitive crawler excavator market. Usually finding itself in the top three for tracked excavators for sale on the Plantpages website, Komatsu are a serious player in the market with their 'PC' ranges. With the range starting at 8 tonnes operating weight (Komatsu actually classes these as 'midi crawler excavators') and the main range topping out at 125 tonnes operating weight with the PC1250, (with mining... Read more...
The top end of the weight range of the Kubota mini-diggers falls into our 'tracked excavator' category as, at 8 tonnes, they are above our 6 tonne mini-excavator limit. Kubota are one of the best selling brands in this weight range of tracked excavator and are well-known for their diesel engines - they are amongst the world's largest small diesel engine manufacturers. The Kubota KX080 is the model that falls into this category of midi-excavators. Read more...
Volvo tracked excavators (or crawler excavators) have been part of the Volvo range of construction machinery since 1991 and haved proved to be highly popular in the UK market - especially the heavier end of the weight range. Volvo tracked excavator ranges use the model naming starting with 'EC'. The range is huge with the largest machines as much as 95 tonnes with buckets up to 7 cubic metres. Sharing engine technology with the Volvo Trucks division means that the reliability of these power units are legendary. If you are looking for a smaller Volvo excavator, check out the Volvo... Read more...
